ROHDE & SCHWARZ FSQ40 CALIBRATION and ROHDE & SCHWARZ FSQ40 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSQ40 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ROHDE & SCHWARZ FSQ40 (1155.5001.40)   Description / Specification:    
ROHDE & SCHWARZ FSQ40 40 GHz Signal Analyzer

The R&S FSQ40 20 Hz to 40 GHz Signal Analyzer offers very low phase noise, unsurpassed low residual EVM, a wide dynamic range and above-average accuracy, making it the ideal high-end measuring instrument for development applications, where tolerances and limit values must often be lower than defined in a standard. Specifications. Frequency range: 20 Hz to 40 GHz. RF Performance: DANL with preamplifier < -152 dBm (10Hz); SSB phase noise typ. - 133 dBc (1Hz) at 10 kHz offset, CF 640 MHz; Phase-noise typ. - 160 dBc/Hz @ 10 MHz offset, CF 640 MHz; TOI typ. ±25 dBm; 1-dB-compression point + 13 dBm; 3GPP ACLR 77 dB, 84 dB with noise correction; ACLR for 4-carrier scenario: 77 dB with noise correction. Accuracy: 0.3 dB total level uncertainty up to 3.6 GHz; <0.1 dB linearity error down to -70 dB . IQ Downconverter: IF digitizer 14 bit 81.6 MHz (20.4 MHz IF); IF digitizer 326.4 MHz (option FSQ-B72); IQ Bandwidth (RF) 28 MHz (up to 120 MHz mwith option FSQ-B72); SFDR > 80 dB; IQ memory 16 Msamples each I and Q; output via GPIB or LAN; Sample rate: cont. settable from 10 kHz to 81.6 MHz; e.g. 20 MHz for IEEE802.11a. Speed: 2.5ms sweep time in frequency domain; 1 µs sweep time in time domain; up to 70 remote measurements/s via GPIB; up to 80 manual measurements/s (screen update).



 

Standard Calibration $1,145.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSQ40. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

Please contact us for your ROHDE & SCHWARZ FSQ40 CALIBRATION and/or ROHDE & SCHWARZ FSQ40 40 GHz Signal Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: